Scuppers measure 2 inches high by 6 inches wide. The bottom of the scuppers will be glassed and all will be sealed with epoxy.
skip to main |
skip to sidebar
this is a modification of the original design with the pilot house moved closer to the stern and directly above the LCB (longitudinal center of bouancy)
A chronicle of the projects to come through the doors of Wonderdog Boatworks including the GT22, Tumblehome Nina and whatever else comes along.
GT22
this is a modification of the original design with the pilot house moved closer to the stern and directly above the LCB (longitudinal center of bouancy)
Blog Archive
-
▼
2008
(88)
-
▼
May
(11)
- Sucppers cut in foredeck
- Gunnels finished, ready for glass
- Windows are ready for plexiglas (after painting of...
- Trim over front door doubles as a drip cap
- Transom covered in glas, gunnels and coaming in place
- Work On fwd Gunnels
- Transom Coming Along
- Foredecks glassed in with 6 oz. woven
- The Outboard Motor Bracket
- The Cabin Roof
- The Outboard Motor Bracket
-
▼
May
(11)
About Me
- Cruising Houseboat
- Near Lake Champlain, Vermont, United States
- This blog is about the building and eventual launch of the GT22, a Bateau.com design done by Jacques Mertens of Vero Beach FL. And about all of the other boats and boating projects to come to the shop of Wonderdog Boatworks The most recent project is Tumblehome Nina, a version of Bateau.coms Nina with a bit of Ninegret and the Handy Billy