Yamaha finally sent me the sheet with the mounting hole dimensions for the F25. Made this jig for drilling the holes, three layers of 3/4 inch ply for a depth of three inches. Drilled the holes oversize (3/4 inch), filled with thickened epoxy and will redrill just over correct size for a bit of wiggle room. Worth all the work to protect the transom from rot.
Sunday, January 31, 2010
Jig Made For Drilling Transom
Yamaha finally sent me the sheet with the mounting hole dimensions for the F25. Made this jig for drilling the holes, three layers of 3/4 inch ply for a depth of three inches. Drilled the holes oversize (3/4 inch), filled with thickened epoxy and will redrill just over correct size for a bit of wiggle room. Worth all the work to protect the transom from rot.
